Photovoltaic power generation system mainly consists of Cables,PV modules, a controller, an inverter, a battery, and other accessories (grid-connected does not need a battery).
Depending on whether it depends on the public grid, there are two types of PV systems: off-grid and grid-connected, of which off-grid systems operate independently and do not depend on the grid. Off-grid PV systems are equipped with storage batteries to ensure the stability of the system power and to supply the load with electricity when the PV system does not generate electricity at night or when the electricity generation is insufficient on rainy days.
Regardless of the form, the working principle is that the photovoltaic module will convert light energy into direct current, direct current in the role of the inverter into alternating current, and finally realize the function of electricity, Internet access.
1. Cables
The photovoltaic DC cables &AC power cables underground,earth wiring.
2. Photovoltaic module
The photovoltaic module is the core part of the whole power generation system, which is composed of photovoltaic module sheets or different specifications of photovoltaic modules cut by a laser cutting machine or steel wire cutting machine together.
Component types.
1.1 Monocrystalline silicon solar panels: a photoelectric conversion rate ≈ of 18%, up to 24%, is the highest conversion rate of all photovoltaic modules. It is generally encapsulated with tempered glass and waterproof resin, which is strong and durable, and its service life is generally up to 25 years.
1.2 Polycrystalline silicon solar panels: photoelectric conversion rate ≈ of 14%, and the production process of monocrystalline silicon is similar, the difference between polycrystalline silicon is a lower photoelectric conversion rate, lower price, and shorter life. However, polycrystalline silicon materials are easy to manufacture, save electricity, and have low production costs, so they are vigorously developed.
1.3 Amorphous silicon solar panels: photoelectric conversion rate ≈ of 10%, and the production method is completely different from monocrystalline silicon and polycrystalline silicon. It is a kind of thin film solar cell, the process is greatly simplified, silicon material consumption is very little, and electricity consumption is even lower. Its main advantage is that it can generate electricity even in low-light conditions.
2. Controller (off-grid system use)
The photovoltaic controller is an automatic control device that can automatically prevent the battery from overcharging and over-discharging.
It adopts a high-speed CPU microprocessor and high-precision A/D analog-to-digital converter, which is a microcomputer data acquisition and monitoring control system. It can quickly collect the current working status of the PV system in real-time, obtain the working information of the PV station at any time, and accumulate the historical data of the PV station in detail. It provides an accurate and sufficient basis for evaluating the rationality of PV system design and checking the reliability of system component quality. It also has a serial communication data transmission function, which can centralize the management and remote control of multiple PV system sub-stations.
3. Inverter
The inverter is a device that converts the direct current generated by photovoltaic power generation into alternating current, photovoltaic inverter is one of the important system balances in the photovoltaic array system, and can be used with the general AC power supply equipment.
Solar inverters have special functions to match the PV array, such as maximum power point tracking and islanding effect protection functions.
Solar inverters can be divided into the following three categories.
3.1 Stand-alone inverters: Used in stand-alone systems where the PV array charges the batteries and the inverter uses the DC voltage from the batteries as the energy source. Many stand-alone inverters also integrate a battery charger, which can charge the batteries with AC power. Generally, this type of inverter does not come into contact with the grid and therefore does not require islanding effect protection.
3.2 Grid-tied inverters: The output voltage of the inverter can be fed back to the commercial AC power supply, so the output sine wave needs to be the same phase, frequency, and voltage as the power supply. The grid-connected inverter will have a safety design that will automatically shut down the output if it is not connected to the power supply. If the grid power trips, the grid-connected inverter does not have a backup power supply function.
3.3 Backup Battery Inverter: A special inverter that has a battery as its power source, with a battery charger in it to charge the battery, and if there is too much power, it will backfill to the AC power side. This inverter can provide AC power to the specified load when the grid power jumps, so it needs to have the islanding effect protection function.
4. Battery (the grid-connected system does not need)
The battery is the equipment for storing electricity in the photovoltaic power generation system. At present, there are four kinds of batteries: lead-acid maintenance-free batteries, ordinary lead-acid batteries, colloidal batteries, alkaline nickel-cadmium batteries, and widely used lead-acid maintenance-free batteries and colloidal batteries.
Working principle: The sunlight shines on the PV module during the day, generating DC voltage, converting light energy into electricity, and then transmitting it to the controller, after the controller’s overcharge protection, the electricity from the PV module is delivered to the battery for storage for use when needed.